UVC Led and UVC is similar in the way that both can germicide germs.  We have layout the below the difference. 

UVC Lamp is sometimes called Mercury Lamp.  It you choose UVC Mercury lamp, you cannot be in the room and after disinfection, you need to quickly open the window as mercury and ozone are produced when the machine is functioning.

Ultraviolet technology is a non-chemical methods to disinfection. Ultraviolet light is part of light spectrum which is divided into  three ranges of wavelength: Only UV-C is Germicidal and can destroy germs.

• UV-A - 315 nm to 400 nm
• UV-B - 280 nm to 315 nm
• UV-C - 100 nm to 280 nm

How UVC Works in Destroying Germs?

UVC light deactivates the DNA of the germs which include bacteria, virus and other pathogens and thus destroys their ability to multiply. UVC light causes damage to the nucleic acid of the microorganisms and prevent the cells for replication. When the organism tries to replicate, it dies.

Where UVC has been used?

UVC is not a new technology. UVC is used in disinfection and purification of water, air or surfaces. It destroys the molecular structure in the cells of microorganisms (pathogens such as bacteria, viruses etc.) thereby sterilizing water, air and the surface of objects.

1. aquarium
2. ice making
3. swimming pool
4. dairy processing
5. drink processing
6. cosmetic production
7. laboratories
8. hospitals and clinics
9. pharmaceutical production

1. What is the charging method?
   Charging is power with a USB cable with an internal battery of 2000mah.
2. Does the battery last?
   This product is energy-saving and consumes very little energy. It comes with fast charging approx. 2 to 3 hours for a complete charge.
3. Does the product consume high power?
   This product has high energy saving. The product can be used approximately 5 to 6 hours after a full charge.

1. How to use a UVC LED Sterilizer Lamp Wand?
   Press the button, face the LED beads towards the object and then scan.
2. How does this UVC Germicidal Lamp Wand work?
   UVC main application is destroying molecular structure in the cells of microorganisms in a short time by destroying the DNA and RNA of the organism to prevent its reproduction.
   The product can eliminate bacteria or virus in seconds.
3. How long does it take to scan an item?
   Scanning time also depends on the surface areas of the products. Irradiate the object back and forth for 3 to 5 times for about 5 to 30 seconds each time for small objects.  For larger surface, it required a longer time.   As a general rule, just swing back and forth slowly covering the entire surface.
4. Can we sterilize our mask?
   Yes, it is a good idea to sterilize the mask with this product and to make the product re-usable again.
5. Does is required start-up time before scanning?
   No warm-up required. You can immediately scan the object. Some other UVC Germicidal lamp outside required long startup time.

UVC LED Sterilizer Lamp is suitable to be used at the home of offices to scan all objects that we usually touch. In offices, they are great to scan all incoming parcels, letter, keyboard, mouse and even money. 

At home, the UVC LED Sterilizer Lamp is generally being used to scan all objects we bring from outside, our pillow and bedsheets and most importantly, all objects in the children room, especially the children toys.